moodlite

moodlite => moodlite Design => Topic started by: akku3D on March 02, 2019, 09:57:22 PM

Title: modified "tile bottom"
Post by: akku3D on March 02, 2019, 09:57:22 PM
after two, three posts have broken off, I have slightly modified "bottom tile V2.0" and have added a 1mm chamfer on all posts on three sides.
I'll upload the stl if anyone's interested.
Title: Re: modified "tile bottom"
Post by: bertybassett on September 06, 2019, 10:34:33 PM
who that is much better, when I increased the print times the post would always snap off.

I will try your tiles tomorrow
Title: Re: modified "tile bottom"
Post by: FitzZZ on October 12, 2019, 11:46:15 AM
Thank you for sharing! I'm using your base design for my project 👌