moodlite => moodlite Software => Topic started by: ecspot on May 13, 2019, 12:54:30 AM

Title: Error when trying to add more than 1 tile
Post by: ecspot on May 13, 2019, 12:54:30 AM
I have 2 tiles with 1 led at each corner (6 leds)
When I click on settings tab I get:

16:51:15.178 -> WS error
16:51:15.213 -> Invalid UTF-8 in text framer_s@⸮⸮⸮⸮e":"3,","mqtt_host_name":"⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮","mqtt_port":"⸮⸮⸮⸮⸮⸮⸮⸮⸮","mqtt_user_name":"⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮","mqtt_user_password":"⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮","mqtt_client_id":"⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮"}}
16:51:15.457 -> WS disconnected

// ------------------ Basic settings ------------------
#define FASTLED_INTERRUPT_RETRY_COUNT   20         // Use this to determine how many times FastLED will attempt to re-transmit a frame if interrupted
#define STANDBY_LED_BRIGHTNESS         2         // Define Standby mode LED brightness
#define DEBUG_ON                  true      // Flag to turn On/Off debugging      [True = On, False = Off]
#define STATIC_IP                  true      // Flag to use static IP            [True = Static IP, False = DHCP - AP mode]
#define RESET_BUTTON               false      // Flag to use hardware reset button   [True = Use HW button, False = Don't use HW button]
#define NTP_ON                     false      // Flag to use NTP Server            [True = Use NTP server, False = Don't use NTP server]
#define MQTT_ON                     false      // Flag to use MQTT                  [True = Use MQTT server, False = Don't use MQTT server]
#define OTA_ON                     true      // Flag to use OTA updates            [True = Use OTA updates, False = Don't use OTA updates]
#define PIR_ON                     false      // Flag to use PIR sensor            [True = Use PIR sensor, False = Don't use PIR sensor]
#define ESP8266                     true      // Flag to use ESP8266               
//#define ESP32                     true      // Flag to use ESP32               
// ----------------------------------------------------
Title: Re: Error when trying to add more than 1 tile
Post by: ecspot on May 13, 2019, 02:36:18 AM
i should add that I can only get 3 leds to come on at a time. It always says this when loading.  I've even tried clearing the eeprom

16:50:39.595 -> Nr. of LEDs: 3
16:50:39.630 -> Nr. of LEDs per corner: 1
16:50:39.665 -> Number of tiles:1
16:50:39.665 -> Nr. of sides per tile: 3,
Title: Re: Error when trying to add more than 1 tile
Post by: ecspot on May 13, 2019, 02:49:03 AM
so strange.  after hours of it not changing, it finally saved the new settings and turned on the second tile. I don't get what changed.  Just randomly entered the settings again without changing anything after the last set of fails.