News

moodlite - Coming soon


Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - mar_robHD

Pages: 1
1
moodlite Software / Turn off red standby led
« on: May 03, 2019, 11:05:28 PM »
Hello, is there a way to turn off the red standby led? In addition, a wireless network called moodlite is active even though a static IP has been assigned. How can I disable this. Thanks

2
moodlite Design / In and out on three sides of the panel
« on: April 11, 2019, 04:00:12 PM »
Have anyone a panel stl with in and out on three sides so i can build that? That would be great in the release and would take it all to a higher level.
Thanks for the awsome project.
~Marlon

3
moodlite Software / Hexagon panel support
« on: April 10, 2019, 03:14:56 PM »
Please add support for hexagon panels. Options like: LEDīs per panel. Or that i can set a color per panel. Like that would be nice:
=549

4
moodlite Software / Select one color for moodlite panels
« on: April 08, 2019, 11:57:23 PM »
Any way to set a color for all moodlite panels? If I set a led color like 207d77 it wont be replaced with a effect :<
Thanks :)

5
moodlite Software / Cant build moodlite.ino
« on: April 06, 2019, 07:24:09 PM »
If I build the moodlite.ino with the mqtt, ntp server or both functions in the Arduino IDE I get these errors:

Code: [Select]
Arduino: 1.8.8 (Windows 10), TD: 1.45, Board: "LOLIN(WEMOS) D1 R2 & mini, 80 MHz, Flash, Disabled, 4M (1M SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 921600"

WARNING: library Timezone claims to run on (avr) architecture(s) and may be incompatible with your current board which runs on (esp8266) architecture(s).
In file included from C:\Users\marlo\OneDrive\Desktop\Moodlite\Moodlite.ino:31:0:

C:\Users\marlo\Documents\Arduino\libraries\FastLED/FastLED.h:14:21: note: #pragma message: FastLED version 3.002.006

 #    pragma message "FastLED version 3.002.006"

                     ^

In file included from C:\Users\marlo\Documents\Arduino\libraries\FastLED/FastLED.h:65:0,

                 from C:\Users\marlo\OneDrive\Desktop\Moodlite\Moodlite.ino:31:

C:\Users\marlo\Documents\Arduino\libraries\FastLED/fastspi.h:110:23: note: #pragma message: No hardware SPI pins defined.  All SPI access will default to bitbanged output

 #      pragma message "No hardware SPI pins defined.  All SPI access will default to bitbanged output"

                       ^

C:\Users\marlo\OneDrive\Desktop\Moodlite\Moodlite.ino: In function 'void setup()':

Moodlite:595:58: error: invalid conversion from 'void (*)(void*)' to 'void (*)()' [-fpermissive]

     trNtpCheckServer.every(TR3H, ntpCheckServer, (void*)0);

                                                          ^

In file included from C:\Users\marlo\OneDrive\Desktop\Moodlite\Moodlite.ino:59:0:

C:\Users\marlo\Documents\Arduino\libraries\Timer-master/Timer.h:41:10: error:   initializing argument 2 of 'int8_t Timer::every(long unsigned int, void (*)(), int)' [-fpermissive]

   int8_t every(unsigned long period, void (*callback)(void), int repeatCount);

          ^

Moodlite:595:58: error: invalid conversion from 'void*' to 'int' [-fpermissive]

     trNtpCheckServer.every(TR3H, ntpCheckServer, (void*)0);

                                                          ^

In file included from C:\Users\marlo\OneDrive\Desktop\Moodlite\Moodlite.ino:59:0:

C:\Users\marlo\Documents\Arduino\libraries\Timer-master/Timer.h:41:10: error:   initializing argument 3 of 'int8_t Timer::every(long unsigned int, void (*)(), int)' [-fpermissive]

   int8_t every(unsigned long period, void (*callback)(void), int repeatCount);

          ^

Moodlite:605:63: error: invalid conversion from 'void (*)(void*)' to 'void (*)()' [-fpermissive]

     trMqttCheckMessages.every(TR1S, mqttCheckMessage, (void*)0);

                                                               ^

In file included from C:\Users\marlo\OneDrive\Desktop\Moodlite\Moodlite.ino:59:0:

C:\Users\marlo\Documents\Arduino\libraries\Timer-master/Timer.h:41:10: error:   initializing argument 2 of 'int8_t Timer::every(long unsigned int, void (*)(), int)' [-fpermissive]

   int8_t every(unsigned long period, void (*callback)(void), int repeatCount);

          ^

Moodlite:605:63: error: invalid conversion from 'void*' to 'int' [-fpermissive]

     trMqttCheckMessages.every(TR1S, mqttCheckMessage, (void*)0);

                                                               ^

In file included from C:\Users\marlo\OneDrive\Desktop\Moodlite\Moodlite.ino:59:0:

C:\Users\marlo\Documents\Arduino\libraries\Timer-master/Timer.h:41:10: error:   initializing argument 3 of 'int8_t Timer::every(long unsigned int, void (*)(), int)' [-fpermissive]

   int8_t every(unsigned long period, void (*callback)(void), int repeatCount);

          ^

Moodlite:607:59: error: invalid conversion from 'void (*)(void*)' to 'void (*)()' [-fpermissive]

     trMqttSendStatus.every(TR30M, mqttSendStatus, (void*)0);

                                                           ^

In file included from C:\Users\marlo\OneDrive\Desktop\Moodlite\Moodlite.ino:59:0:

C:\Users\marlo\Documents\Arduino\libraries\Timer-master/Timer.h:41:10: error:   initializing argument 2 of 'int8_t Timer::every(long unsigned int, void (*)(), int)' [-fpermissive]

   int8_t every(unsigned long period, void (*callback)(void), int repeatCount);

          ^

Moodlite:607:59: error: invalid conversion from 'void*' to 'int' [-fpermissive]

     trMqttSendStatus.every(TR30M, mqttSendStatus, (void*)0);

                                                           ^

In file included from C:\Users\marlo\OneDrive\Desktop\Moodlite\Moodlite.ino:59:0:

C:\Users\marlo\Documents\Arduino\libraries\Timer-master/Timer.h:41:10: error:   initializing argument 3 of 'int8_t Timer::every(long unsigned int, void (*)(), int)' [-fpermissive]

   int8_t every(unsigned long period, void (*callback)(void), int repeatCount);

          ^

Multiple libraries were found for "EEPROM.h"
 Used: C:\Users\marlo\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0-beta3\libraries\EEPROM
 Not used: C:\Users\marlo\Documents\Arduino\libraries\arduino-NVM
exit status 1
invalid conversion from 'void (*)(void*)' to 'void (*)()' [-fpermissive]

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Thanks for help
Marlon

6
Which are the right retract values for 0.2mm layer high? I have the Alfawise U20 and use Cura.
Thanks for help.
~Marlon

7
moodlite Software / Sound reactive Moodlite
« on: March 05, 2019, 03:37:50 PM »
Hello,
When es Moodlite sound reactive. Any way to make it sound reactive?

Thanks

Pages: 1

SMF spam blocked by CleanTalk