moodlite - Coming soon

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - shiryou

Pages: 1 2 3
moodlite Software / Re: Error when uploading to ESP8266 module
« on: March 14, 2019, 07:28:39 AM »

i had that error a lot of time, and i just try again and it worked fine, except one time that my board was broken and have to ask amazon for a replacement

moodlite Software / Re: Change Number of LED's per tile?
« on: March 04, 2019, 07:26:47 AM »
we are working on it

moonlite Builds / Re: BanhammersWrath Semi-Final Build
« on: February 19, 2019, 07:44:11 AM »
great build, what board are you using for sound? we are investigating to add it as a feature

moodlite Software / Re: moodlite software [2.0] Release
« on: February 15, 2019, 07:11:44 PM »
I will try them when i have some spare time. Im developing something to make the effects to work like tiles instead of individual leds or corners, but i have to rewrite almost all of the effects...

moodlite Software / Re: moodlite software [2.0] Release
« on: February 12, 2019, 07:36:53 PM »
ey @mannymiller!

I have news! I received the ADMP401 mem microphone module i ordered from china today and ive been playing with it all the afternoon. It works a lot better than the arduino microphone MAX4466. Im looking for some simple code to test it and get some clear animations, right now im using some demo codes from here: but they are a little complex to test them

I saw your moodlight reviews on cine-light! Glad you solved your problems. Now lets see if we can make some sound reaction effects and add them to the project!

moodlite Software / Re: moodlite software [2.0] Release
« on: February 11, 2019, 01:31:28 PM »
thats the standby mode

moodlite Design / Re: How to do triangle patterns with three edges?
« on: February 09, 2019, 06:04:56 PM »
thats how i understand it too, but i dont try this configuration so cant really tell something about it...

Not sure if it is a code thing or a physical LED limitation.  As I understand the LEDs are serially addresses. So if you split your signal wire you cannot address both paths individually.   Iím a newb at all this too so I could be wrong.

moodlite Electronics / Re: power drop ?
« on: February 07, 2019, 07:57:00 PM »
right now im using esp8266 nodeMCU 1.0, the recommended one, i tried with esp32 too and works nicely to, but it requires to change some code.

I made some things with nano and UNO, and have a lot more of processing power than this ones (i believe), or at least the leak of having to keep a wifi connection and a web server made the lights to work better. But a lot of problems that people are talking about Spigot and me never have them and cant even replica them to try to fix the code...

moodlite Electronics / Re: power drop ?
« on: February 07, 2019, 06:57:55 PM »
I have been using sinelong this afternoon and i can see any glitches... its so strange....

never see this error before, maybe are you missing some library???

---- edit ----
All the errors are about your timezone library. look the first message you get:

WARNING: library Timezone claims to run on (avr) architecture(s) and may be incompatible with your current board which runs on (esp8266) architecture(s).
In file included from D:\Moodlite_2019_01_27-V2.0\Arduino\Moodlite\Moodlite.ino:31:0:

moodlite Software / Re: moodlite software [2.0] Release
« on: February 01, 2019, 07:42:52 PM »
I try this code of natural nerd:

over nodeMCU with my mic MAX4466 the analog read from the mic is totally shit... its better than with other code but not working at all...

I tried the same with a Wemos D1 R1 board and the signal is a lot better, but you have to put the mic in front of the speaker to work nice...

so.... this mic is a bullshit xDDDDDD

Ill buy the one he use and try again in 2 weeks when it arrives xDDDD

moodlite Electronics / Re: power drop ?
« on: February 01, 2019, 06:37:10 PM »
I tried with a 5A and a 10A PS and the result is the same, so im going to buy one of these level shifting boards too

moodlite Software / Re: moodlite software [2.0] Release
« on: February 01, 2019, 05:12:50 PM »
Ill try this with my mic this weekend, ill report back!!

Hey shiryou, its not that sinelon and juggle do not work,  but more they do not suit this build.  im guessing its down to personal taste., i do prefer a nice slow animation on this particular setup. if you have seen my vu meters,  sinelon and juggle work quite well, but on the ring version those patterns don`t .. its just down to taste i guess..

i have used the msgeq7 board for a few of my setups, its a capable board and produces great sound reaction.  To make it easier for people to build that particular vu meter i recommend the msgeq7 board, the downside is cost and the only decent one i can find is in the US..  i can get a 5 metre, 60 leds a metre led strip for £19, the msgeq7 board is £12 for mono, or £15 for stereo add £5 shipping.. it just doesnt make sense.   i printed 10 pieces out of a roll of filament ( £13),   The leds using 3 a corner worked out about a metre and a half ( £7),  2 x esp8266 (£8) , then a msgeq7 breakout board (£19 with shipping) ...

 yes i could build one of my own, then you have problems with fake chips ( which is quite common)  then you have problems with other people building them.  Like you i share what i do for free,  i do not make any money out of it as its a hobby i enjoy. so i try and make things a simple as possible so i do not spend what little time i have helping people with there problems.., if that makes sense.

 My llne in version uses a couple of resistors and a capacitor and works as well as the msgeq7 for sound reaction.  but as mentioned a rather long input lead would be needed.  A wireless version using the esp8266 has been done  seen here :
&t=259s not sure if something like this could be added to this setup.

Anyways, just ideas... But so far what has been done is brilliant. i finished converting from 1 led a corner to 3 this afternoon and hope to get a video together which will be a review of my build. hopefully it will push some more people your way.. keep up the great work!!!

moodlite Electronics / Re: power drop ?
« on: February 01, 2019, 12:38:38 PM »
I have exactly the same problem. But it is dropping around tile 3. In my case im powering directly from PC usb so i thought it was my problem. I think spigot has the same problem to, so... one more problem to solve...  :'( :'( :'(

Let's talk 3D printers... / Re: Building a Prusa MK3 Clone...
« on: February 01, 2019, 07:49:27 AM »
Great work! those prints looks awesome!

Pages: 1 2 3

SMF spam blocked by CleanTalk