moodlite - Coming soon

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - LordVader

Pages: 1 2 3 4 5 ... 8
moonlite Builds / Re: LordVader's build log
« on: January 25, 2019, 02:48:53 PM »
I took the STL that shfaxx uploaded:

moonlite Builds / Re: LordVader's build log
« on: January 25, 2019, 10:55:39 AM »
As my printer is working again (YEAH!!) I printed the slightly thicker top part yesterday:

Looking pretty good. Hopefully my LEDs will arrive soon so that I can start building - finally.

moodlite Software / Re: Moodlite source now on Github
« on: January 23, 2019, 12:41:23 PM »
I've added a section on how to prepare Arduino IDE for compiling the Moodlite code:

More stuff coming soon :D

moodlite Software / Re: NodeMCU Software... Help required
« on: January 22, 2019, 02:22:06 PM »
I see the garbage characters but never see "WiFi connected"

Try switching the Baud rate of the serial monitor and then press the RST button on your NodeMCU. Do this until your see something useful.
That helped me to find out the correct Baud rate as this was different from the one I am uploading with.

moodlite Software / Re: Errors uploading to NodeMCU
« on: January 16, 2019, 07:42:56 AM »
For making the Sketch Data Upload available follow this instructions (they are mentioned in the Github wiki, btw ;)):

Regarding the espcomm errors please make sure that your settings (port, board, frequency etc.) are correct.

moodlite Chitchat / Re: Detailed Instruction for Uploading
« on: January 15, 2019, 04:49:01 PM »
Not yet.
Had a lot to do the last days :(

Sounds good.
This thing should be part of the next release then!

Hi there!
That looks really nice!

Did you "just" stretch the top or did you do a proper change with paying attention to keep the mounting clips at the right size?

moodlite Chitchat / Re: Detailed Instruction for Uploading
« on: January 13, 2019, 06:13:04 PM »
Hi there!
The Zip file you downloaded contains the data directory. Unfortunately Ardunio IDE tends to move the .ino file into a new directory as the application wants the sketch file in a folder with the same name.
Just move the data directory into the newly created folder.

I will review and edit the wiki on Github as spigot gave me the rights to do so. Then it might get easier as I plan on creating a detailed manual for every step.

moodlite Design / Re: MQTT Support
« on: January 12, 2019, 04:05:06 PM »
Happy to do so ;-)

moodlite Design / Re: MQTT Support
« on: January 12, 2019, 10:47:59 AM »
Although I do not have any LEDs yet (screw you, Aliexpress :D) I can't wait to play around with my Home Assistant and MQTT!

Speaking of both way communication: What about the possibility to add a motion sensor to the power block to make the Moodlite report motion to the MQTT server?
Just an idea for when there are no more ideas left :D

moodlite Software / Re: moodlite software [1.1.3] Release
« on: January 12, 2019, 08:12:10 AM »
Like I already said I really would like to help on the wiki.
Let's talk about how I can do this via PM

moodlite Software / Re: moodlite software [1.1.3] Release
« on: January 11, 2019, 10:36:25 PM »
Thanks for the new version.
I had some struggle getting this to work. It would be nice to have some more detailed comments on the sketch to make sure what the coder meant ;)

I had to switch over to DHCP before getting everything to work. Before that I wasn't quite sure if the DHCP option is for the AP mode of the Moodlite or for when the Moodlite is connected to the user's WiFi.

I think that DHCP should be the default configuration as the most of the users should have an DHCP in their network instead of wanting to configure the Moodlite's IP address manually.

moonlite Builds / Re: AgileNebula Moodlite Build
« on: January 11, 2019, 06:25:15 PM »
Hi there!
Those Photon boards seem to be really cool! Unfortunately they are quite expensive here in Germany (around 40 EUR) but maybe I'll buy one just for the fun of playing around with it.

I've seen that you are planning to hot glue the Photon board into the power block. Do you have interest that I do some CAD'ing so that you can mount the board properly?

moodlite Design / Re: Power block designs
« on: January 11, 2019, 07:48:23 AM »
Done very small adjustment on the single Wemos part.

Pages: 1 2 3 4 5 ... 8

SMF spam blocked by CleanTalk