News

moodlite - Coming soon


Moodlite Marky Marc Build Log

marky · 472

marky

  • Newbie
  • *
    • Posts: 12
    • Likes: +1/-0
    • View Profile
on: January 21, 2019, 09:49:35 PM
Hello everybody,
I am in the process of making my own moodlite and I finded it hard for someone who had more or less no electric background. So I desided to make this post and share with all the way I did it and try and make a more complete tutorial. This will be updated over time.
Feel free to ask for stuff and il try and add picture of it.

so lets start by my spread sheet

I added a 1000uf capasitor (long pin is the positive side) and a 330 ohm resistor



Squematic



and a photo of the actual thing on a breadboard



Next I 3d printed everything on my prusa i3 mk3 took around 7 hours per pannel. With some hatchbox white petg  3 wall, 0.2 layer height, 7% infill, top and bottom concentri, support material is not required


a closes up on how I fitted everything inside.



closes up of the littel glue I'v put in the triangle to make sure the cable stay in on the low part



here a pic of the build done

« Last Edit: January 22, 2019, 02:31:35 AM by marky »



 


SMF spam blocked by CleanTalk