News

moodlite - Coming soon


ESPAsyncTCP.h

Sam_Perry77 · 528

Sam_Perry77

  • Newbie
  • *
    • Posts: 4
    • Likes: +0/-0
    • View Profile
on: January 31, 2019, 07:22:38 PM
When I follow the directions found here https://github.com/spigotx/Moodlite/wiki/First-setup-of-Moodlite I can't verify because I get an error stating that:

"Arduino: 1.8.8 (Windows 10), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Enabled, 4M (1M SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 115200"

Moodlite:37:32: error: ESPAsyncWebServer.h: No such file or directory

  #include <ESPAsyncWebServer.h>

                                ^

compilation terminated.

exit status 1
ESPAsyncWebServer.h: No such file or directory"

As such, I can not even upload the sketch to my board because of this error. Anyone know what to do about this?



James3xyx3

  • Newbie
  • *
    • Posts: 7
    • Likes: +0/-0
    • View Profile
Reply #1 on: January 31, 2019, 08:12:33 PM
You are missing the ESPAsyncwebserver library. In the wiki there is a page showing you how to set up your arduino before uploading the sketch. I recommend you read through that. Hope this helps



LordVader

  • moodlite Developer
  • Full Member
  • *****
    • Posts: 113
    • Likes: +6/-0
  • I find your lack of faith disturbing!
    • View Profile

Sam_Perry77

  • Newbie
  • *
    • Posts: 4
    • Likes: +0/-0
    • View Profile
Reply #3 on: January 31, 2019, 11:14:34 PM
OK. So I got it flashed successfully. However, I am now having an issue where the only wifi that shows up is "ESP_24EBD2" and the password of "Moodlite" does not work. The serial monitor gives me some information on startup I will paste it below. Also, I didn't change a single thing in the code as the directions said.

"⸮⸮⸮⸮⸮⸮--- initEEPROMData - Start ---
Hostname loaded from memory.
Wifi Hostname: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
Wifi ssid: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
Wifi password: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
Manual Display On: 255
Automatic Display On: 255
Display On: 255
Display Off: 255
Pir sensor enabled: 255
Nr. of LEDs: 0
Nr. of LEDs per corner: 255
Brightness: 255
Speed: 255
Pattern: 255
Pattern color: 255
LED color:
NTP Server:
MQTT Hostname: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
MQTT port: ⸮⸮⸮⸮⸮⸮⸮⸮⸮
MQTT User name: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
MQTT User password: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
MQTT Client ID: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
--- initEEPROMData - End ---
--- initWiFi - Start ---
Connecting to Wifi. Please wait.
Wifi status: 1
--- initWiFi - End ---"



LordVader

  • moodlite Developer
  • Full Member
  • *****
    • Posts: 113
    • Likes: +6/-0
  • I find your lack of faith disturbing!
    • View Profile
Reply #4 on: February 01, 2019, 09:28:19 AM
Hi!

Did you change anything on the Moodlite.ino before uploading?


spigot

  • Global Moderator
  • Full Member
  • *****
    • Posts: 112
    • Likes: +24/-0
  • There's no place like 127.0.0.1
    • View Profile
Reply #5 on: February 01, 2019, 02:03:21 PM
OK. So I got it flashed successfully. However, I am now having an issue where the only wifi that shows up is "ESP_24EBD2" and the password of "Moodlite" does not work. The serial monitor gives me some information on startup I will paste it below. Also, I didn't change a single thing in the code as the directions said.

Please first of all use eraseEEPROM function to clear EEPROM and than try again.



 


SMF spam blocked by CleanTalk